Use the Modify Segment {Number} form to modify the parameters for the selected segment of the bridge layout line, divide the selected segment into a user-specified number of segments, or delete the selected segment.
Adjust Segment Parameters option. When this option is chosen, the options on the right half of the form become available.
Note: As choices are made, when appropriate, CSiBridge will issue error or warning messages and provide helpful tips to make the modification process easier. Be sure to read the tips carefully.
Vertical Layout options
Segment Type drop-down list. Select from the drop-down list the type of alignment for the selected segment of the layout.
End Station edit box. Enter a value for the location of the end station for the selected segment, measuring from left to right in the currently selected units.
Elevation Z edit box. If necessary, revise the elevation of the selected segment of the layout line by entering a value in this edit box.
Grade (%) edit box. If necessary, revise the grade of the selected segment of the layout line by entering a value in this edit box.
Horizontal Layout options
Segment Type drop-down list. Select from the drop-down list the type of alignment for the selected segment of the layout.
End Station edit box. Enter a value for the location of the end station for the selected segment, measuring from left to right in the currently selected units.
End Bearing edit box. If necessary, revise the bearing for the selected segment. The initial layout line bearing was specified on the Bridge Layout Line Data form.
Radius of Circle edit box. As necessary, enter a radius value for the selected segment.
Divide Segment into ___ Pieces option. When this option is chosen, enter the number of segments into which the selected segment should be divided.
Delete Segment option. When this option is chosen, the selected segment will be deleted and CSiBridge will automatically adjust the alignment accordingly. This option is not available if the layout consists of only one segment.
See Also
|
Access the Modify Segment {Number} form as follows:
|