cPropMaterialSetORebar_1 Method |
Sets the other material property data for rebar materials.
Namespace:
ETABS2016
Assembly:
ETABS2016 (in ETABS2016.dll) Version: 16.0.0.0 (16.0.0.0)
Syntaxint SetORebar_1(
string Name,
double Fy,
double Fu,
double EFy,
double EFu,
int SSType,
int SSHysType,
double StrainAtHardening,
double StrainUltimate,
double FinalSlope,
bool UseCaltransSSDefaults,
double Temp = 0
)
Function SetORebar_1 (
Name As String,
Fy As Double,
Fu As Double,
EFy As Double,
EFu As Double,
SSType As Integer,
SSHysType As Integer,
StrainAtHardening As Double,
StrainUltimate As Double,
FinalSlope As Double,
UseCaltransSSDefaults As Boolean,
Optional Temp As Double = 0
) As Integer
int SetORebar_1(
String^ Name,
double Fy,
double Fu,
double EFy,
double EFu,
int SSType,
int SSHysType,
double StrainAtHardening,
double StrainUltimate,
double FinalSlope,
bool UseCaltransSSDefaults,
double Temp = 0
)
abstract SetORebar_1 :
Name : string *
Fy : float *
Fu : float *
EFy : float *
EFu : float *
SSType : int *
SSHysType : int *
StrainAtHardening : float *
StrainUltimate : float *
FinalSlope : float *
UseCaltransSSDefaults : bool *
?Temp : float
(* Defaults:
let _Temp = defaultArg Temp 0
*)
-> int
Parameters
- Name
- Type: SystemString
The name of an existing rebar material property. - Fy
- Type: SystemDouble
- Fu
- Type: SystemDouble
The minimum tensile stress. [F/L2] - EFy
- Type: SystemDouble
- EFu
- Type: SystemDouble
- SSType
- Type: SystemInt32
This is 0, 1 or 2, indicating the stress-strain curve type.
Value | SSType |
---|
0 | User defined |
1 | Parametric - Simple |
2 | Parametric - Park |
- SSHysType
- Type: SystemInt32
This is 0 through 7, indicating the stress-strain curve type.
Value | SSHysType |
---|
0 | Elastic |
1 | Kinematic |
2 | Takeda |
3 | Pivot |
4 | Concrete |
5 | BRB Hardening |
6 | Degrading |
7 | Isotropic |
- StrainAtHardening
- Type: SystemDouble
This item applies only when parametric stress-strain curves
are used and when UseCaltransSSDefaults is False.
It is the strain at the onset of strain hardening. - StrainUltimate
- Type: SystemDouble
This item applies only when parametric stress-strain curves
are used and when UseCaltransSSDefaults is False.
It is the ultimate strain capacity. This item must be larger than the
StrainAtHardening item. - FinalSlope
- Type: SystemDouble
This item applies only to parametric stress-strain curves.
It is a multiplier on the material modulus of elasticity, E.
This value multiplied times E gives the final slope of the curve. - UseCaltransSSDefaults
- Type: SystemBoolean
If this item is True, the program uses Caltrans default
controlling strain values, which are bar size dependent. - Temp (Optional)
- Type: SystemDouble
The temperature at which the specified data applies.
The temperature must have been defined previously for the material.
This item applies only if the specified material has properties that are temperature dependent.
That is, it applies only if properties are specified for the material at more than one temperature.
Return Value
Type:
Int32Returns zero if the data is successfully assigned; otherwise it returns a nonzero value.
Remarks
ExamplesPublic Sub Example()
Dim SapModel As cSapModel
Dim EtabsObject As cOAPI
Dim ret As Integer = -1
EtabsObject = CreateObject("CSI.ETABS.API.ETABSObject")
ret = EtabsObject.ApplicationStart()
SapModel = EtabsObject.SapModel
ret = SapModel.InitializeNewModel()
ret = SapModel.File.NewSteelDeck(4,12,12,4,4,24,24)
ret = SapModel.PropMaterial.SetMaterial("Rebar", eMatType.Rebar)
ret = SapModel.PropMaterial.SetORebar_1("Rebar", 62, 93, 70, 102, 2, 2, 0.02, 0.1, -0.1, False)
EtabsObject.ApplicationExit(False)
SapModel = Nothing
EtabsObject = Nothing
End Sub
See Also