Form: Display Design Results
Review some of the results of the concrete frame design directly on the SAP2000 model (i.e., on screen) using the Design menu > Concrete Frame Design > Display Design Info command. This command displays Design Input and Output parameters.
Display design information on screen as follows:
Run an analysis.
Perform at least one design using the Design menu > Concrete Frame Design > Start Design/Check of Structure command.
Select the Design menu > Concrete Frame Design > Display Design Info command to access the Display Design Results form.
Select the Input or Output option and choose from the drop-down list the type of information to be displayed on screen.
Right click on a frame object to display the Concrete Column Design Information form or Concrete Beam Design Information form, which also can be displayed using the Interactive Concrete Frame Design command.
Use the Assign menu > Clear Display of Assigns command to remove the on-screen display of design information.
TIP: When selecting to display design ratios a check box is available giving you the option to specify the minimum ratio for which results will be displayed. For example, you can specify the only ratios above 0.90 are to be displayed. In addition, another check box is available giving you the option to select the frame objects for which results are displayed.
Example: Use of this command is demonstrated in Problem H.