Form: Show Frame Loads
Click the Display menu > Show Load Assigns > Frame/Cable/Tendon command to display the Show Frame Loads form and specify the frame loads to be shown on the model in the active window.
Load Pattern Name drop-down list. Select the load pattern for which the loading is to be displayed.
Load Type options. This area of the form will have several selections, some of which will not be available because that type of loading has not been included in the model. Select the Load Type, and where applicable, the Coordinate System, Component, and Load Step.
Show Joint Loads with Span Loads check box. Check this check box to view the joint loads in addition to the span loading.
Show Span Loading Values check box. Check this check box to view loading values.
Click the OK button. If the OK button is not available, no loads have been assigned to frames, cables, and tendons in the model.
Note: Certain options on the form will be inactive depending on the type of loading defined on the model. Only one loading can be displayed on the model at a time.
Note: If the Tendon Calculated Load Data option is selected, with the loads displayed on the screen, right click on the tendon to display another form that shows the loads in tabular format.
See Also
Assign - Frame Loads - Distributed
Assign - Frame Loads - Gravity
Assign - Frame Loads - Temperature
Assign - Cable Loads - Distributed
Assign - Cable Loads - Gravity
Assign - Cable Loads - Temperature
Assign - Tendon Loads - Gravity
Assign - Tendon Loads - Temperature