Link/Support Property Data Form

Additional Form: Advanced Link P-Delta Parameters

Use the Link/Support Property Data form to specify linear and nonlinear link properties.

Note: The software must be the Advanced version of CSiBridge to use the nonlinear dynamic link properties.

Link/Support Type drop-down list. Select the type of link to be defined. The selection made affects options available in the Directional Properties area and the appearance of the form that displays after the Modify/Show All / Modify/Show for {Direction} button has been clicked.

Note: Linear link elements can only have linear properties assigned to them. In a linear analysis CSiBridge converts the specified effective damping for a link element to modal damping. It then adds the modal damping calculated for all link elements in the model that have effective damping specified to any modal damping already specified for the structure as a whole to get the final modal damping. CSiBridge reports this final modal damping in the printed analysis output for building modes.

Property Name edit box. Accept the default or enter a name for the property definition. Use the Set Default Name button to assign the next sequential default name.
Property Notes Modify/Show button. Click this button to access the Link Notes form. Use that form to add link notes to the model file.
Mass, Weight and Rotational Inertia 1, 2, and 3 edit boxes. Enter values for the total mass (force x sec2 divided by length), weight (force), and the rotational inertias (force x length x sec2) for the property definition.
Factors for Line, Area and Solid Springs
- Property is Defined for this Length in a Line Spring edit box. Indicate the length over which the specified link properties apply if they are applied as a line spring to a line object.
- Property is Defined for this Area in Area and Solid Springs edit box. Indicate the area over which the specified link properties apply if they are applied as springs to an area object or solid object face.
Directional Properties.
- Direction check boxes. Choose the directions (U1,U2,U3,R1,R2,R3) for this property by clicking the appropriate check boxes.
- Fixed check boxes. If the Fixed check box is checked, the associated degree of freedom is fixed or rigid.
- NonLinear check boxes. To specify Nonlinear, check the Nonlinear check box.
- Properties buttons. Click the Modify/Show for All button or the Modify/Show for {Direction} button to access the Link/Support Directional Properties form to specify effective stiffness and damping.
P-Delta Parameters and Advanced button. Click the Advanced button to access the Advanced Link P-Delta Parameters form. Enter the appropriate values for M2 and M3.
Display Color. The color that will be used to display the link on-screen in the model.
1. Click on the "Display Color" text or the small sample square of the color to access the Color form.
2. Select the desired new color on the Color form and click the OK button.

Access the Link/Support Property Data form as follows:

Click the Components > Type > Link Properties > Expand arrow command or select an object drawn as a link/support and click the Advanced > Assign > More > Link/Support > Link/Support Properties command to display the Link/Support Properties form. The Link/Support Property Data form also can be accessed by clicking the + (plus) symbol that may appear next to a drop-down list of available link properties, such as the Link Property drop-down lists on the Assign Springs Along Line Object form. Additionally, the Link/Support Properties form also displays when the Define/Show Link Properties button is clicked on the Bridge Wizard when Step 3.3 Links is highlighted.
Then do one of the following:

- Click the Add New Property button.
- Select a previously defined Link/Support property in the Properties display list and click the Modify/Show Property button.

Access the Advanced Link P-Delta Parameters form by clicking the Advanced button on the Link/Support Property Data form.