Run a design as follows:
Click the Analyze menu > Run Analysis command to run an analysis of the model. The model must be analyzed before it can be designed.
Click Design menu > {Type} Design > Start Design/Check command.
When the design is complete, the design results will display on screen.
Note that this command is not available if no frame
elements in the model have the {Type}
design procedure. See Overwrite
Frame Design Procedure for more information about design procedures
and for information about changing the design procedure.
If frame elements have been selected before this command is used, only
the selected frame elements are designed. If no frame elements are selected
before this command is used, all {Type} elements are designed.