Show Load Assigns - Areas

Form:  Show Area Loads

Click the Display menu > Show Load Assigns > Areas command to display the Show Area Loads form and specify the area loads to be shown on the model in the active window.

• Load Pattern Name drop-down list. Select the load pattern for which the loading is to be displayed.

• Load Type options. This area of the form will have several selections, some of which will not be available because that type of loading has not been included in the model. Select the Load Type, and where appropriate, the Coordinate System,  the Direction, Distribution and Face.

• Click the OK button. If the OK button is not available, no loads have been assigned to areas in the model.

Note:  Only one loading can be displayed on the model at a time.

Note:  The Show Area Loads form also displays when the Modify Display button is clicked on the Point Information form and Loads tab has been selected.

See Also

Assign - Area Loads - Gravity (All)

Assign - Area Loads - Pore Pressure (Plane, Asolid)

Assign - Area Loads - Reference Temperature (All)

Assign - Area Loads - Rotate (Asolid)

Assign - Area Loads - Strain

Assign - Area Loads - Surface Pressure (All)

Assign - Area Loads - Temperature (All)

Assign - Area Loads - Uniform (Shell)

Assign - Area Loads - Wind Pressure Coefficients