Use the Prestress Loss Parameters form to specify friction and anchorage losses and other loss parameters
Friction and Anchorage Losses. Accept the defaults or use the edit boxes in this area can be used to specify the Curvature Coefficient, the Wobble Coefficient, and the Anchorage Set Slip.
Other Loss Parameters. When tendons are modeled as elements, the parameters in this area of the form (Elastic Shortening Stress, Creep Stress, Shrinkage Stress, Steel Relaxation Stress) apply in addition to the losses computed by the analysis due to time dependent behavior defined in the material properties. Elastic Shortening Stress generally should be set to zero.
Units drop-down list. Use the displayed units or select new units from the drop-down list.
Show Prestress Losses button. Click to display the Tendon Response form.
See Also
Access the Prestress Loss Parameters form as follows:
Alternatively, the following approach can be used if the form is being used when the Bridge Object is being defined or reviewed.
|