Bridge Bent Data Form

Bent properties specify the geometry and section properties of the bent cap and the bent columns. They also specify the base support condition of the bent columns. Bent properties are used in abutment assignments to the bridge object. The bent property allows specification of the connection between the abutment and the girders as either integral or connected to the bottom of the girders only. The bent property also allows specification of a single bearing line (continuous superstructure) or a double bearing line (discontinuous superstructure).

Use the Bridge Bent Data form to define the bridge bents.

See Also

Bridge Wizard

 

Access the Bridge Bent Data form as follows:

  1. Click the Components > Substructure Item > Bents > Expand arrow command, or on the Bridge Wizard form select the Bents item in the Bridge Component Properties area and click the Define/Show Bents button, to display the Define Bridge Bents form.

  2. Click the Add New Bridge Bents button, or highlight a previously defined bent definition and click the Add Copy of Bridge Bent or Modify/Show Bridge Bent button.

After the bent has been defined, assign it to the bridge model using a Bridge Objects or Step 7 of the Bridge Wizard.