Use the Define Bridge Section Data - Precast Concrete I Girder form to define a deck section parametrically.
Cross-Section. The display area at the top of the form shows a cross section of the template deck section. This is a static display and will not update if any changes are made in the Section Data area of the form. The labels used in this graphic correspond to the parenthetic labeling for the items in the Section Data spreadsheet (e.g., Top Slab Thickness {t1}; Concrete Haunch Thickness {t2}; Left Overhang Length {L1} and so forth).
Sketch. The sketch to the right of the cross-cross section will update when changes are made on the form.
Note: If Section is Not Legal appears in red type, review the data in the Section Data spreadsheet area. Click the ? (question mark) to display a message box indicating the problem with the data.
Do Snap check box. When this check box is checked, the mouse pointer will snap to the joints when the mouse is moved over the sketch display. When the check box is unchecked, the mouse pointer can be moved anywhere on the display. The coordinates for the location of the pointer will display in the X and Y display boxes.
Show Section Details button. Click the Show Section Details button to display the Bridge Section Points for {Bridge Section Name} form. When that form displays, the data on that form is not editable, but the display area at the top of that form will update to reflect the changes made in the Section Data area. Note that the Show Section Details button does not appear on the form when the form is accessed from the Bridge Object Data form, as described in Method 2 above.
Modify/Show Properties Materials and Frame Sects button. Click the Materials button to access the Define Materials form. Click the Frame Sects button to access the Frame Properties form. Use the forms to define new properties, or review and modify existing properties, as necessary, for the materials and frame sections used for the deck section.
Section Data. This area of the form displays the default geometry for the deck section. Click in a cell in the spreadsheet to type a revised value for that item.
General Data
Bridge Section Name. Use the default section name or supply a revised name.
Slab Material Property. Identifies the slab material property.
Number of Interior Girders. Specifies the number of interior girders. Click in the cell to type a revised value.
Total Width. Specifies the total width of the deck section. Click in the cell to type a revised value.
Girder Longitudinal Layout. Specifies the longitudinal layout of the girder. Click in the cell to choose that the layout line Follow the Layout Line or As Straight Lines.
Constant Girder Spacing. Specifies the spacing for the girders. Click in the cell to choose Yes or No.
Girder Spacing Definition. If No is selected, the form changes to include cells to specify Girder Space Sn, where n is the number of spaces needed to separate the Number of Interior Girders specified plus and left and right exterior girders. Use the defaults or click in the cells to type in the necessary values.
Recalculate Girder Spacing button. Click this button to access the Recalculate Bridge Section Girder Spacing form. Use this form to quickly and easily calculate user-specified spacing of the girders. The spacing applied depends on a user-specified "fixed spacing," the number of girders specified, and the distance over which the girders are distributed (i.e., the Total Width minus the Left Overhang Length and the Right Overhang Length).
Constant Girder Haunch Thickness (t2). Specifies the thickness of the girder haunch. Click in the cell to choose Yes or No.
Slab Thickness.
Top Slab Thickness (t1). Specify the thickness of the top slab.
When Yes is selected for the Concrete Girder Haunch Thickness, specify a single value for the Concrete Haunch Thickness (t2).
When No is selected Concrete Girder Haunch Thickness, the form changes to include cells to specify the Haunch Height for the Left Exterior Girder (t2), Interior Girder n (t2) where n is the Number of Interior Girders specified, and Right Exterior Girder (t2). Click in the cells to type in the necessary values.
Constant Girder Frame Section. Specifies the frame section for the girders.
Girder Section Properties.
When Yes is selected for the Constant Girder Frame Section, specify a Girder Section by clicking in the cell to display a drop-down list of previously defined frame sections.
When No is selected, specify the Left Exterior Girder Section, the Interior Girder n Section where n is the Number of Girders specified, and the Right Exterior Girder Section by clicking in the cell to display a drop-down list of previously defined frame sections.
Fillet Horizontal Dimension Data. Use the f1and f2 Horizontal Dimension cells to specify the horizontal dimensions of the fillet at the specified location. As noted above, the locations of the various data are shown on the cross-section at the top of the form. Click in the cell to type a revised value.
Left Overhang Data
Left Overhang Length (L1). Specifies the entire length of the overhang on the left side of the deck section. Click in the cell to type a revised value.
Left Overhang Distance to Fillet (L3). Specifies the distance of the beginning of the overhang from the fillet. Click in the cell to type a revised value.
Left Overhang Outer Thickness (t5). Specifies the outer thickness of the left overhang. Click in the cell to type a revised value.
Right Overhang Data
Right Overhang Length (L2). Specifies the entire length of the overhang on the right side of the deck section. Click in the cell to type a revised value.
Right Overhang Distance to Fillet (L4). Specifies the distance of the beginning of the overhang from the fillet. Click in the cell to type a revised value.
Right Overhang Outer Thickness (t6). Specifies the outer thickness of the right overhang. Click in the cell to type a revised value.
Insertion Point Location. Specify the X and Y offsets from the reference point to the insertion point. Click in the cell to type a revised value.
See Also
|
Access the Define Bridge Section Data - Precast Concrete I Girder form as follows:
Method 1:
Click the Components > Superstructure Item > Deck Sections > Expand arrow command, or on the Bridge Wizard select the Deck Sections item and click the Define/Show Sections button to display the Define Bridge Deck Sections form. Then do one of the following:
Alternatively, click the Components > Superstructure Item > Deck Sections > New command to display the Select Bridge Deck Section Type form identified in the preceding bullet items. Method 2: Note that when this method is used, the parameters on the form cannot be modified.
|