Form: Strip Object Information
Access the Strip Object Information form by moving the mouse pointer over the design strip object and clicking the right mouse button. If more than one object occurs at the same location, hold down the Shift key and then click the right mouse button to display a selection list - select the object from the selection list. If the model is unlocked, changes to design strip objects can be made using this form.
Note: To display a strip object, check the Design Strip Layer A, Design Strip Layer B, or Design Strip Layer Other option on the Set Display Options form.
Strip Object Name. Identifies the design strip object. Design strip objects are used in the application of post-tensioning and for the calculation and reporting of reinforced concrete. SAFE automatically assigns an alphanumeric identifier to design strip objects sequentially as the objects are drawn.
Assignments tab
Group - this assignment cannot be changed here; see Groups for more information
Geometry tab - displays the number of design strip segments, along with the number of segment points, and the coordinates of each segment point. For each segment, segment widths and lengths are displayed as well as whether the width has been determined by the program or it has been specified by the user.
Design tab - displays the strip layer, a design flag, rebar material and direction, where the rebar cover is specified, whether the middle strip is set automatically or by the user, and the reduction factor to be applied to slab design forces associated with reducible live load patterns.
Reset All: The button resets any changes made to the items on the tabs to the values displayed when the form was first opened.
Note: This form can also be accessed by expanding the tree under Objects > Design Strip Objects on the Model tab in the Model Explorer window and double clicking on the desired design strip object name.